Stability analysis for double-stranded DNA oligomers and their noncovalent complexes with drugs by laser spray

Laser spray, which is a newly developed ionization technique, can characterize the stability of noncovalent complexes in the solution phase. By using this advantage, laser spray has been applied to probe the intrinsic stability of double-stranded DNA (dsDNA) sequences and their binding affinities with various drugs in the solution phase. Systematic experiments were carried out using six 16-mer and three 22-mer dsDNA oligomers, together with the complexes of the 16-mer dsDNA with minor groove binders: berenil, Hoechst 33342, DAPI, and netropsin. Dissociation curves for each dsDNA or each complex were plotted as a function of laser power. The laser power (E50%), where 50% of each dsDNA or each complex was dissociated, was compared with its melting temperature (Tm) determined by UV spectroscopy. Linear correlations between E50% and Tm were obtained not only for the dsDNA oligomers (correlation factor r = 0.9835) but also for the 16-mer dsDNA complexes with minor groove binders (r = 0.9966). In addition, laser spray has successfully clarified the binding affinities of a 16-mer dsDNA with two intercalators: daunomycin and nogalamycin. In the case of the dsDNA-daunomycin complex, by changing the molar ratio of dsDNA : drug from 1 : 1 to 1 : 5, the concentration-dependent stability of the complex was confirmed by laser spray. The present results demonstrate that laser spray mass spectrometry can be a powerful and convenient method to investigate the relative binding affinities of dsDNA-ligand complexes in the solution phase, which could be applied to the early stage of high-throughput screening of drugs targeting for dsDNA.     

Pricing Lookback Options with Knock‐out Boundaries

In the last decade, many kinds of exotic options have been traded and introduced in the financial market. This paper describes a new kind of exotic option, lookback options with knock‐out boundaries. These options are knock‐out options whose pay‐offs depend on the extrema of a given securities price over a certain period of time. Closed form expressions for the price of seven kinds of lookback options with knock‐out boundaries are obtained in this article. The numerical studies have also been presented.     

Atomistic study of GaSe/Ge(111) interface formed through van der Waals epitaxy

Layered materials can be grown on various substrates through van der Waals epitaxy (vdWE) regardless of lattice mismatch. The atomistic study of the film-substrate interface in vdWE is becoming increasingly important due to their expected applications as two-dimensional (2D) materials. In this contribution, we have grown GaSe thin films on Ge(111) substrates by molecular beam epitaxy and studied the GaSe/Ge(111) interface using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Cross-sectional HAADF-STEM observations revealed that the grown layers adopt predominantly the expected wurtzite-like structure and stacking, but layers with zinc-blende-like structure, similar to Ga₂Se₃ but apparently different, and other layer stacking sequences, exist locally near the film-substrate interface. These results demonstrate that even in vdWE, structural changes can occur in the grown layers adjacent to the substrate, highlighting the importance of such interface for synthesizing and applying ultimately thin 2D materials.     

Peripheral Modifications of meso-Hydroxyporphyrins: Formation of π-Electronic Anions and Ion-Pairing Assemblies

Phenyl groups were introduced at the β-positions proximal to the meso-hydroxy moiety in hydroxyporphyrin Ni^II complexes by oxidized BINAP Pd^II complexes. Ion-pairing assemblies of deprotonated π-electronic anions, anionic site of which was stabilized by the introduced phenyl moieties with a bulky cation, were formed. They showed charge-by-charge assemblies, assembly modes of which were modulated by the anionic building units.     

Interaction of acetone with single wall carbon nanotubes at cryogenic temperatures: a combined temperature programmed desorption and theoretical study

The interaction of acetone with single wall carbon nanotubes (SWCNTs) at low temperatures was studied by a combination of temperature programmed desorption (TPD) and dispersion-augmented density-functional-based tight binding (DFTB-D) theoretical simulations. On the basis of the results of the TPD study and theoretical simulations, the desorption peaks of acetone can be assigned to the following adsorption sites: (i) sites with energy of approximately 75 kJ mol (-1) ( T des approximately 300 K)endohedral sites of small diameter nanotubes ( approximately 7.7 A); (ii) sites with energy 40-68 kJ mol (-1) ( T des approximately 240 K)acetone adsorption on accessible interstitial, groove sites, and endohedral sites of larger nanotubes ( approximately 14 A); (iii) sites with energy 25-42 kJ mol (-1) ( T des approximately 140 K)acetone adsorption on external walls of SWCNTs and multilayer adsorption. Oxidatively purified SWCNTs have limited access to endohedral sites due to the presence of oxygen functionalities. Oxygen functionalities can be removed by annealing to elevated temperature (900 K) opening access to endohedral sites of nanotubes. Nonpurified, as-received SWCNTs are characterized by limited access for acetone to endohedral sites even after annealing to elevated temperatures (900 K). Annealing of both purified and as-produced SWCNTs to high temperatures (1400 K) leads to reduction of access for acetone molecules to endohedral sites of small nanotubes, probably due to defect self-healing and cap formation at the ends of SWCNTs. No chemical interaction between acetone and SWCNTs was detected for low temperature adsorption experiments. Theoretical simulations of acetone adsorption on finite pristine SWCNTs of different diameters suggest a clear relationship of the adsorption energy with tube sidewall curvature. Adsorption of acetone is due to dispersion forces, with its C-O bond either parallel to the surface or O pointing away from it. No significant charge transfer or polarization was found. Carbon black was used to model amorphous carbonaceous impurities present in as-produced SWCNTs. Desorption of acetone from carbon black revealed two peaks at approximately 140 and approximately 180-230 K, similar to two acetone desorption peaks from SWCNTs. The characteristic feature of acetone desorption from SWCNTs was peak at approximately 300 K that was not observed for carbon black. Care should be taken when assigning TPD peaks for molecules desorbing from carbon nanotubes as amorphous carbon can interfere.     

Comparative study on the structural, optical, and electrochemical properties of bithiophene-fused benzo[c]phospholes

Three types of bithiophene-fused benzo[c]phospholes were successfully prepared by Ti(II)-mediated cyclization of the corresponding dialkynylated bithiophene derivatives as a key step. Each sigma(3)-phosphorus center of the benzo[c]phosphole subunits was readily transformed into sigma(4)-phosphorus center by Au coordination or oxygenation. In addition, the bithiophene subunit was functionalized at the alpha,alpha'-carbon atoms by Pd-catalyzed cross-coupling reactions with heteroarylmetals and by an S(N)Ar reaction with hexafluorobenzene. The experimentally observed results (NMR spectroscopy, X-ray analysis, UV/Vis absorption/fluorescence spectroscopy, and cyclic/differential-pulse voltammetry) have revealed that the structural, optical, and electrochemical properties of the bithiophene-fused benzo[c]phospholes vary considerably depending on the pi-conjugation modes at the bithiophene subunits and the substituents of the heterocyclopentadiene components. The appropriately ring-annulated sigma(3)-P derivatives and sigma(4)-P-AuCl complexes were found to emit fluorescence in the orange-red region, and the sigma(4)-P-oxo derivatives proved to undergo reversible one-electron reduction at -1.4 to -1.8 V (vs ferrocene/ferrocenium). These results indicate that the bithiophene-fused benzo[c]phospholes possess narrow HOMO-LUMO gaps and low-lying LUMOs, which was confirmed by density functional theory calculations of their model compounds. The time-of-flight measurement of an ITO/benzo[c]phosphole/Al device showed that the electron mobility in the P-oxo derivative is one-order higher than that in Alq(3) at low electric fields. The present study demonstrates that the arene-fused benzo[c]phosphole skeleton could be a highly promising platform for the construction of a new class of phosphole-based optoelectrochemical materials.     

Negatively Charged π‐Electronic Systems by Deprotonation of Hydroxy‐Substituted Dipyrrolyldiketone Boron Complexes

Boron complexes of meso‐hydroxy‐substituted dipyrrolyldiketones, as the precursors of negatively charged π‐electronic systems, were synthesized via the oxidative introduction of an acetoxy unit at the meso position of dipyrrolyldiketones and subsequent hydrolysis. The anionic site formed upon deprotonation was moderately stabilized by hydrogen‐bond‐donating pyrrole NH, generating non‐complexing anionic species.     

Dirhodium(II)-catalyzed C-H amination reaction of (S)-3-(tert-butyldimethylsilyloxy)-2-methylpropyl carbamate: a facile preparation of optically active monoprotected 2-amino-2-methyl-1,3-propanediol

Dirhodium(II)-catalyzed C-H amination reaction of (S)-3-(tert-butyldimethylsilyloxy)-2-methylpropyl carbamate, which was easily prepared from methyl (S)-2-methyl-3-hydroxypropanoate, proceeded more smoothly than those of their 2-(methoxycarbonyl)propyl derivative to give the corresponding oxazolidinone in excellent yield. The resulting oxazolidinone was converted efficiently into both (R)-monoprotected and (S)-monoprotected 2-amino-2-methyl-1,3-propanediols.     

Determination of total cholesterol in serum by high-performance liquid chromatography with electrochemical detection

A simple and sensitive HPLC method that does not require derivatization for determining cholesterol has been developed. Investigation of voltammetric behavior of cholesterol showed that cholesterol could be oxidized on a glassy carbon electrode in non-aqueous solvents. This was applied to the development of a method by HPLC with electrochemical detection (HPLC-ED). The HPLC-ED was optimized using the separation of cholesterol and oxysterols including 26-hydroxycholesterol and 24S-hydroxycholesterol. The separation was carried out with a Develosil C30-UG-3 column; acetonitrile-2-propanol (9:1, v/v) containing 50mM LiClO(4) as a mobile phase; and an applied potential at 1.9V versus Ag/AgCl. The current peak height was linearly related to the amount of cholesterol injected from 0.5-100 microM (r>0.999). The detection limit (S/N=3) of cholesterol was 0.36 microM (1.8 pmol). Cholesterol at 100 microM was directly detected with a relative standard deviation (RSD) of less than 1.0% (n=8). Total cholesterol and free cholesterol in control human serum were determined by the present method with the recovery of more than 90% and the RSD (n=6) of less than 3.0%.